HOME-FLEX Gas Appliance Connectors

HOME-FLEX Stainless Steel Gas Appliance Connectors are manufactured from high tensile strength stainless steel. Our safe, solid, one-piece construction has deeper corrugations with no soldering joints. This increases the flexibility, allowing them to bend easier for installations.

Our stainless steel gas connectors are highly resistant to corrosion from common household cleaners, such as petroleum products, ammonia, oils and grease. Stainless steel is especially useful in areas where the natural gas has a high-sulfur content. Under normal conditions, stainless steel gas connectors are highly resistant to crushing, kinking, and cracking, thereby providing a longer and more trouble-free service life.

Our stainless steel gas connectors are also available with a yellow polymer coating, which offers an extra level of protection against corrosives. And it looks great.

HOME-FLEX Gas Appliance Connectors are Design Certified by CSA for both indoor and outdoor connections of stationary gas appliances.

Find the HOME-FLEX GAS APPLIANCE CONNECTOR you need.

HOME-FLEX Specifications

HOME-FLEX Stainless steel gas connectors are manufactured with smooth flared tube ends which reduce the torque required to connect the fitting, thus making installations much easier.

Sizes:
3/8” O.D. (1/4” I.D.) HFHC Series
1/2” O.D. (3/8” I.D.) HFDC Series
5/8” O.D. (1/2” I.D.) HFRC Series
1” O.D. (3/4” I.D.) HFSA Series

Appliance Connector Safety Tips

  • Flexible Gas Appliance Connectors should not be crushed, pinched, twisted or severely bent.
  • Do not install flexible connectors through walls, ceilings, or floors.
  • A flexible connector shall be no longer than six feet (6’) and shall be attached to a gas pipe equipped with a shutoff valve located in the same room as the appliance.
  • NEVER reuse a flexible connector when you replace an appliance or move to a new home. New connections require new connectors.
  • Always use connectors that are certified by CSA.

Range Connector 1/2″ FIP x 3/4″ FIP Gas Valve x 36″

Model #: HFRC-5J-36

Max Flow Rate (CFH): 149,600

Coated Special Application Connector 1″ OD x 3/4″ ID x 3/4″ FIP X 3/4″ MIP x 72″

Model #: HFSA-Y-12-72

Max Flow Rate (CFH): 300400

Coated Special Application Connector 1

Coated Special Application Connector 1″ OD x 3/4″ ID x 3/4″ FIP X 3/4″ MIP x 60″

Model #: HFSA-Y-12-60

Max Flow Rate (CFH): 323850

Coated Special Application Connector 1

Coated Special Application Connector 1″ OD x 3/4″ ID x 3/4″ FIP X 3/4″ MIP x 48″

Model #: HFSA-Y-12-48

Max Flow Rate (CFH): 347300

Coated Special Application Connector 1

Coated Special Application Connector 1″ OD x 3/4″ ID x 3/4″ FIP X 3/4″ MIP x 36″

Model #: HFSA-Y-12-36

Max Flow Rate (CFH): 391950

Coated Special Application Connector 1

Coated Special Application Connector 1″ OD x 3/4″ ID x 3/4″ FIP X 3/4″ MIP x 30″

Model #: HFSA-Y-12-30

Max Flow Rate (CFH): 414275

Coated Special Application Connector 1

Coated Special Application Connector 1″ OD x 3/4″ ID x 3/4″ FIP X 3/4″ MIP x 24″

Model #: HFSA-Y-12-24

Max Flow Rate (CFH): 436600

Coated Special Application Connector 1

Coated Special Application Connector 1″ OD x 3/4″ ID x 3/4″ FIP X 3/4″ MIP x 18″

Model #: HFSA-Y-12-18

Max Flow Rate (CFH): 458925

Coated Special Application Connector 1

Coated Special Application Connector 1″ OD x 3/4″ ID x 3/4″ FIP X 3/4″ MIP x 12″

Model #: HFSA-Y-12-12

Max Flow Rate (CFH): 481250

Coated Special Application Connector 1

Coated Range Connector 5/8” OD (1/2″ ID) x 1/2″ MIP x 1/2″ FIP x 72″

Model #: HFRC-Y-45-72

Max Flow Rate (CFH): 104900

Coated Range Connector 5/8'' OD (1/2

Coated Range Connector 5/8” OD (1/2″ ID) x 1/2″ MIP x 1/2″ FIP x 60″

Model #: HFRC-Y-45-60

Max Flow Rate (CFH): 116650

Coated Range Connector 5/8'' OD (1/2

Coated Range Connector 5/8” OD (1/2″ ID) x 1/2″ MIP x 1/2″ FIP x 48″

Model #: HFRC-Y-45-48

Max Flow Rate (CFH): 128400

Coated Range Connector 5/8'' OD (1/2

Coated Range Connector 5/8” OD (1/2″ ID) x 1/2″ MIP x 1/2″ FIP x 36″

Model #: HFRC-Y-45-36

Max Flow Rate (CFH): 149600

Coated Range Connector 5/8'' OD (1/2

Coated Range Connector 5/8” OD (1/2″ ID) x 1/2″ MIP x 1/2″ FIP x 30″

Model #: HFRC-Y-45-30

Max Flow Rate (CFH): 160200

Coated Range Connector 5/8'' OD (1/2

Coated Range Connector 5/8” OD (1/2″ ID) x 1/2″ MIP x 1/2″ FIP x 24

Model #: HFRC-Y-45-24

Max Flow Rate (CFH): 170800

Coated Range Connector 5/8'' OD (1/2

HOME-FLEX WATER HEATER CONNECTORS
Corrugated and Braided Stainless Steel

Using copper connectors to water heaters just doesn’t make sense anymore. That’s why HOME-FLEX has created a full line of Corrugated and Braided Stainless Steel Water Heater Connectors.

Our stainless steel connectors are stronger than old-fashioned copper. Plus they’re easier to bend and a much better value. But like copper they won’t rust or corrode.

HOME-FLEX water heater connectors are flexible enough to cope with seismic shifts without breaking. And they’re durable enough for the long haul with a tough exterior that resists corrosion.

HOME-FLEX—Keeping you well connected.
  • 304 grade stainless steel is stronger and more flexible than copper. Will not rust or corrode. Resists work hardening and seismic damage.
  • Our corrugated connectors feature our own proprietary corrugated pipe that’s easy to bend with no soldering.
  • Our braided connectors feature a two-layer construction—durable PVC pipe inside a braided exterior of tough stainless steel.
  • Easy, fast installation. Won’t crimp or kink, and 100% leak tested.
  • Built-in dielectric sleeves. No need for extra add-on unions.
  • IAPMO Certified. CA Lead-Free compliant.

Find the HOME-FLEX WATER HEATER CONNECTOR you need.

Our Corrugated Water Heater Connectors are strong and durable, yet flexible to withstand seismic movement without rupturing. Featuring our own proprietary corrugated pipe that’s easy to bend with no soldering. Features built-in dielectric sleeves and ¾” threaded female nut connectors.

HFWC-07-12 – 3/4” FPT IN x 3/4” FPT OUT – 12” length – Stainless Steel Corrugated Water Connector
HFWC-07-15 – 3/4” FPT IN x 3/4” FPT OUT – 15” length – Stainless Steel Corrugated Water Connector
HFWC-07-18 – 3/4” FPT IN x 3/4” FPT OUT – 18” length – Stainless Steel Corrugated Water Connector
HFWC-07-24 – 3/4” FPT IN x 3/4” FPT OUT – 24” length – Stainless Steel Corrugated Water Connector

HFWC-07-12 – 3/4” FPT IN x 3/4” FPT OUT – 12” length – Stainless Steel Corrugated Water Connector

HFWC-07-15 – 3/4” FPT IN x 3/4” FPT OUT – 15” length – Stainless Steel Corrugated Water Connector

HFWC-07-18 – 3/4” FPT IN x 3/4” FPT OUT – 18” length – Stainless Steel Corrugated Water Connector

HFWC-07-24 – 3/4” FPT IN x 3/4” FPT OUT – 24” length – Stainless Steel Corrugated Water Connector

Our Braided Water Heater Connectors are strong and durable, yet flexible to withstand seismic movement without rupturing. Features built-in dielectric sleeves, a PVC core with braided stainless steel exterior.

HFBC-07-15 – 3/4” FIP IN x 3/4” FIP OUT – 15” length – Stainless Steel Braided Water Heater Supply Line
HFBC-07-18 – 3/4” FIP IN x 3/4” FIP OUT – 18” length – Stainless Steel Braided Water Heater Supply Line
HFBC-07-24 – 3/4” FIP IN x 3/4” FIP OUT – 14” length – Stainless Steel Braided Water Heater Supply Line

HFBC-07-15 – 3/4” FIP IN x 3/4” FIP OUT – 15” length – Stainless Steel Braided Water Heater Supply Line

HFBC-07-18 – 3/4” FIP IN x 3/4” FIP OUT – 18” length – Stainless Steel Braided Water Heater Supply Line

HFBC-07-24 – 3/4” FIP IN x 3/4” FIP OUT – 14” length – Stainless Steel Braided Water Heater Supply Line

Your browser is out-of-date!

Update your browser to view this website correctly.Update my browser now

×