FAQ

Yes, however it must be sleeved in a non-metallic conduit ½” larger than the pipe. The underground section must not contain a fitting.


HOME-FLEX CSST has been tested and certified by CSA and IAPMO for compliance with the industry standard ANSI LC-1 / CSA 6.26, “Fuel Gas Piping Systems using Corrugated Stainless Steel Tubing (CSST).”


HOME-FLEX meets all necessary requirements, but check with your local inspector first.


80% lighter, 70% faster (no cutting and threading of pipe) 50% labor saving.


If it is a fixed appliance, yes. If not, we recommend terminating the HOME-FLEX pipe and attaching a gas connector.

View video


Yes, HOME-FLEX (previously name alpha-flex) will only work with HOME-FLEX, or alpha-flex, tubing and fittings.


Thoroughly read the installation manual and either go to the complete certification page, or mail in the card.

Click here to become certified


No, but you do need to be certified to install Home-Flex CSST.


According to NFPA 54 Section 7.13, all gas systems must be electrically bonded.

View video